A-A-2112A
October 24, 1989
SUPERSEDING
A-A-2112
November 1, 1982
COMMERCIAL ITEM DESCRIPTION
COSTUMER, METAL (CONTEMPORARY STYLE)
The General Services Administration has authorized the use of this
Commercial Item Description.
1. Scope. The costumer shall be a contemporary style designed for heavy duty office use, with knock down construction.
2. Salient characteristics:
3. Requirements.
3.1 Metal finish. The exposed metal shall be a satin finish aluminum with a protective coating, satin finish anodized aluminum, satin finish stainless steel, or satin finish chrome plated steel.
3.2 Pole. The pole shall be a minimum of one inch in diameter capped with a metal or high impact plastic cap.
3.3 Hooks. The costumer shall have 4 double hooks (hat and coat), through bolted, with matching bolt head and capnut. All ends of the hooks shall have plastic garment protectors. The bottom of the hooks shall be a minimum of 56 inches from the floor. Alternatively, the hooks may have ball ends and be attached to the pole with rivets.
3.4 Identification label. The label shall have the contractor’s name or trademark, contract number, NSN (if specified), month and year of manufacture marked with-permanent dark ink. The label shall be affixed to the bottom of the base and shall not be removable by hand without defacement after being affixed for 4 hours.
3.5 Workmanship. The edges and corners shall be eased. The metal shall be free of sharp edges and burrs. The metal finish shall be free of pits~ blisters~ stains~ and brush and grind marks. The costumer shall have no defects that affect the appearance or serviceability of the item.
DISTRIBUTION STATEMENT A: Approved for
public release; distribution is unlimited.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business