A-A-2112A
this CID for quality conformance verification. The sample shall be examined to verify that the requirements referenced in sections 1 and 2 have been met. Any nonconformance with the above requirements shall be considered a defect. All defects found shall be classified as major/minor in accordance with paragraphs 4.4 and 4.5 of this CID.
4.4 Major defects. The following conditions of nonconformance with the stated requirements of the CID shall be considered as major defects which may potentially affect the safety, functionality, durability, usability, and life of the purchased items.
No acceptable evidence of conformance with ASTM Method B-117.
Noncompliance with the stability test.
Noncompliance with the hook test.
Noncompliance with the level test.
Noncompliance with the chromium plating test.
Parts fractured, buckled, bent, punctured, or malformed.
Rivets loose or not set properly.
Sharp edges.
Preservation, packaging, and packing not in accordance with the requirements of the contract or purchase order.
Identification marking missing, wrong, or illegible.
4.5 Minor defects. Nonconformance listed below shall be considered as minor defects affecting the appearance of the finished item.
Rough or slivered surface.
Burrs.
Rough tool markings.
Oversized holes.
Pitted, stained, or blistered surfaces.
Foreign matter embedded in the finish.
Painted surfaces contain sags or runs.
Components and Darts covered with film.
Parts, components, overall covered, not free of grease, dirt, dust, epoxy, stains, etc.
4.6 Sampling. The sampling plan shall be in accordance with MIL-STD-105 with an inspection level II, Acceptable Quality Level (AQL) of 6.5 percent defective for minor defects and an inspection level of S-2, AQL of 2.5 percent defective for major defects.
4.7 Inspection. Completed costumers shall be sampled in accordance with MIL-STD-105. Examine for visual and dimensional defects using level S-2, AQL of 4.0 percent defective.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business