A-A-50017B
2.1.7 Drain. Display cases shall be provided with a free flowing drain not less than 1 inch National Pipe Thread. Drains shall be accessible for normal installation.
2.1.8 Cart bumpers. Cart bumpers shall be stainless steel, aluminum or high-impact resistant plastic or rubber normally used for this purpose.
2.1.9 Water spray attachment. A retractable water spray attachment shall be provided on the display cases when specified (see 5.1), to help keep vegetables crisp and fresh. The attachment hose shall be long enough to cover the length of the case provided.
2.1.10 Corner bumpers. When specified (see 5.2), upright bumpers shall be installed at the specified corners to prevent damage from merchandise stocking trucks. Corner bumpers shall be fabricated of 10 gauge, type 300 series stainless steel or 10 gauge chrome plated steel. Corner bumpers may be either angle type, 6 inches by 6 inches by 24 inches high, or semi-circular 7-1/2 inch diameter by 24 inches high. Either type shall have a base with provisions for anchoring.
2.1.11 Fluorescent lights. Canopy top shall be equipped with a minimum of one row fluorescent lights with bulb reflectors extending over the entire length of the case.
2.2 Data name plate. The display cases shall be furnished with a data name plate in accordance with the applicable requirements of MIL-STD-130 except the requirements for; (a) Methods of applying, (b) Identification tags, (c) Information not required and (d) Optional marking information shall not apply. The data plate shall be made of minimum 20 gauge corrosion-resisting metal and attached to the (item) by rivets, screws or welding in such a manner as to meet the applicable National Sanitation Foundation sanitary requirements for this equipment. The plate shall contain the following information which shall be stamped, engraved or applied by photosensitive means:
National Stock Number
Procurement Instrument Identification Number
Specification Data
Manufacturer’s Name, Address and Telephone Number
Supplier’s Name, Address and Telephone Number (list only if different from Manufacturer)
Manufacturer’s Model Number
Each plate shall be placed so that it is readily visible to the operator during normal operating use and so as to not adversely affect the life and utility of the item.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business